基于GA-PSO的目标分配问题研究

防空作战中的目标分配问题属于NP完全问题,在综合考虑火力单元作战效能和防御效能的基础上,引入火力单元综合有利度,建立了一种用于大规模多火力单元对抗多轮次目标的静态目标分配模型,给出了基于GA因子的改进PSO算法,并将算法应用于目标分配模型的求解,通过VC 6.0编程和计算机仿真验证了模型的可行性和算法的有效性.     

重庆市某混合式热泵工程经济配置方案模拟分析

基于重庆市某混合式热泵工程,采用TRNSYS软件分别就室内温度、湖水温度、地埋管流体温度以及供冷能耗进行了模拟,并与实际运行数据进行对比分析,确定了该模型的准确性和可行性.最后对土壤源热泵承担总负荷15％,25％,35％,45％的4种方案与传统方案一同进行模拟分析,结果显示,土壤源热泵25％的负荷比例在4种配置方案中最...     

基于遗传算法的跳频通信侦察技术

为了识别跳频序列,提出了采用遗传算法并结合跳频信号特点来完成跳频序列的分析与重组,从而实现跳频信号的侦察。在采用传统遗传算法的基础上,针对序列特点提出了5种改进手段,从而大大提高了算法的效率和可用性。最后利用采样的语音信号,对分析与重组过程进行模拟来验证算法的可行性。     

Hilbert空间中拟非扩张映像族公共不动点的迭代算法

给出了Hilbert空间中拟非扩张映像族公共不动点的一个杂交投影算法,使用修正的杂交投影迭代算法,证明了一个强收敛定理,扩展了文献的结果。     

调炮精度检测中双经纬仪优化布站方法

针对“双经纬仪法”检测调炮精度中随机布站使测量系统达不到最佳测量精度的问题,提出了一种优化布站方法.根据火炮调炮范围确定了调炮精度检测中的测量区域,推导出了双经纬仪测量系统对于该测量区域的平均测量不确定度公式.结合某型火炮设计了基于遗传算法的具体优化过程,对测量系统的3个位置参数进行优化,得到最佳测量布局,并通过仿真试...     

采用弹道修正技术的红外干扰弹性能优化

针对弹道修正弹的高维非线性特性导致的性能优化难题,改变概念设计阶段传统的串行设计方式,提出了一种基于实验设计(Design Of Experiments,DOE)和响应面(Response Surface Methodology,RSM)的智能优化算法,定义基本的弹丸结构模型以及相关的设计参数.在DOE的基础上,将设计...     

Equity in genetic newborn screening

State‐level newborn screening allows for early treatment of genetic disorders, which can substantially improve health outcomes for newborns. As the cost of genetic testing decreases, it is becoming an essential part of newborn screening. A genetic disorder can be caused by many mutation variants; therefore, an important decision is to determine which variants to search for (ie, the panel design), under a testing budget. The frequency of variants that cause a disorder and the incidence of the disorder vary by racial/ethnic group. Consequently, it is important to consider equity issues in panel design, so as to reduce disparities among different groups. We study the panel design problem using cystic fibrosis (CF) as a model disorder, considering the trade‐offs between equity and accuracy, under a limited budget. Most states use a genetic test in their CF screening protocol, but panel designs vary, and, due to cost, no state's panel includes all CF‐causing variants. We develop models that design equitable genetic testing panels, and compare them with panels that maximize sensitivity in the general population. Our case study, based on realistic CF data, highlights the value of equitable panels and provides important insight for newborn screening practices.     

Multi-objective design optimization of composite submerged cylindrical pressure hull for minimum buoyancy and maximum buckling load capacity

This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure. The design optimization study is conducted for cross-ply layups [0s/90t/0u], [0s/90t/0u]s, [0s/90t]s and [90s/0t]s considering three uni-directional composites, i.e. Carbon/Epoxy, Glass/Epoxy, and Boron/Epoxy. The optimization study is performed by coupling a Multi-Objective Genetic Algorithm (MOGA) and Analytical Analysis. Minimizing the buoyancy factor and maximizing the buckling load factor are considered as the objectives of the optimization study. The objectives of the optimization are achieved under constraints on the Tsai-Wu, Tsai-Hill and Maximum Stress composite failure criteria and on buckling load factor. To verify the optimization approach, optimization of one particular layup configuration is also conducted in ANSYS with the same objectives and constraints.     

基于模糊均值聚类算法的图像分割

将图像直方图统计特性引入到FCM聚类算法的目标函数中,用混合粒子群优化算法对目标函数进行全局最优求解,提高了图像分割的运算速度。     

利用混合编程改善SMP机群上并行矩阵乘法的性能

针对SMP机群,探讨了分别利用单机优化、OpenMP与MPI从指令级、共享存储级与分布主存级三个层次上改善矩阵并行乘Fox算法性能的方法。并通过调用数学函数库与混合编程的方式,在深腾6800上进行了实验,取得了相当满意的数值效果。